Skip to content
Microprocessor-based Hardware Features
- Microprocessor based controller.
- Expandable architecture for distributed or centralized control systems.
- Standard Small Panel (24wX30hX8d):
- 16 Analog Inputs, 16 Analog Outputs
- 64 Discrete Inputs or Outputs (2 I/O Racks).
- Standard Large Panel (36wX60hX8d):
- 64 Analog Inputs, 16 Analog Outputs
- 160 Discrete Inputs or Outputs (5 I/O Racks).
- Special-Order Floor-Mount Panel:
- 64 Analog Inputs, 16 Analog Outputs
- 224 Discrete Inputs or Outputs (7 I/O Racks).
- Network and communications:
- Four fully-independent serial ports (two RS-422/485, one RS-232/422/485, one modem/RS-232).
- RS-422/485 differential serial network provides noise immunity.
- Error detection and automatic link failure recovery.
- On board modem with auto answer capability. Optional auto-dial out feature also available.
- Optional open communications protocols including Modbus RTU, Allen-Bradley DF1, BACnet, and FrickTalk.
- User interface:
- Simple menu structure for easy access to all features.
- Fast “Hot Key” menu access.
- Alarm highlighting using reverse video characters.
- Extensive status monitoring and data logging.
- Standardized data entry.
- Password control for both viewing and updating of screen data. Customizable by the end-user.
- Self-diagnostics:
- “Watch Dog” timer detects power loss, power droop, or microcontroller malfunction.
- Binary error detection communications protocol insures accurate high speed transfer of data in harsh industrial environments.
- “Self Test” software periodically checks controller for integrity and notifies user of any problems.
- “Internal Panel Temperature” sensor is located on the microcontroller and is used to monitor and log panel temperature (Option).